Click on Start >> Run >> Or Press
Run
.jpg)
type cmd and click on OK . Here we assume your pendrive letter as x: Enter this command written below.
Run
type cmd and click on OK . Here we assume your pendrive letter as x: Enter this command written below.
attrib -h -r -s /s /d x:\*.*
Note: You can copy the above command –> Right-click in the Command Prompt and paste it.
Note: Don’t forget to replace the letter x with your pen drive letter.
Press Enter
Now check for your files in Pen Drive, you should see the files on your USB pen drive now
Press Enter
Now check for your files in Pen Drive, you should see the files on your USB pen drive now
Is it k for all the times ? I heard that it will affect pendrive ? is it true Sir ?
ReplyDeleteNo
DeleteExcellent!!!!
ReplyDeletefixed in seconds :-)
This comment has been removed by the author.
ReplyDeleteVery good, this is very useful for me. Thanks
DeleteSuperb!!! solution Giri.. Though i have to check once if i encounter this problem but Very useful for everyone.. Good work.
ReplyDelete